Recent Posts

The Gibson LP Aerodynamics Corporation has solved the power system relay  (psr) switch. All systems were checked out o-kay and are in harmony with each other. The dean of Dan-Electro Systems has verified the taylor made sk (Samick) boards and they are ready for the journey.  The Extra Strong Plate (esp) guild has verified that the tiles are set for blast off and with survive going through the strat-osphere.  Rick Enbacker is in charge of the lift off.

We have lift off.  The audience gave it a standing ovation.

I am playing the guitar and Band-in-a-Box is supplying the backing tracks.

Note this is just me having fun.  Many may not like this as it is not a conventional song. You have been warned.

https://soundcloud.com/mario_guitar/guitars-in-space

I'm convinced that the manual for MMA is too large But, then so is MMA

I can't believe I didn't see the chart.  Thanks!

From the docs in the section "Patterns":

The offset can be further modified by appending a note length (see the duration chart, below). If you want to specify an offset in the middle of the first beat you can use “1.5” or “1+8”. The latter means the first beat plus the value of an eight note. This notation is quite useful when generating “swing” sequences. For example, two “swing eights” chords on beat one would be notated as: “1 81 90; 1+81 82 90”.

Just a few lines down from this the different note durations are listed. So, in your example you have "2+81" which simply means that the start point for that event is beat 2 PLUS the duration of the "first pair of a swing eights".

You are reading the section for "Bass" notes which takes liberties by not repeating the first section which gives the overall specs for the offset, duration, etc. You are also confusing "note offset" with "position". The NOTE OFFSET is the actual pitch to pick from the underlying scale for the current chord. The + and - referred to in the Bass section change the octave of the note/pitch.

Hope it's all clear now. Shout if not!

The 'Swing' groove (file swing.mma in stdlib) defines bass patterns

Begin Bass Define
   Sync1   1 4  1 90; 2+81 16 1 80; 3 4 1 90; 4+81 16 1 80
   Sync2   1 4  1 90; 2+81 16 1 80; 3 4 5 90; 4 4 1 80
End

This includes the offsets "2+81" and "4+81".  What do the "+81"s do to the offset?

According to mma documentation,

         "The note offset can be modified by appending a single or multiple set of “+” or “-” signs. Each “+”
         will force the note up an octave ..."

The documentation doesn't say anything about <offset>+<a number>.  Adding the +81 changes the pattern's sound, but I can't figure out what it's doing.  Any thoughts would be appreciated.

Thanks

Have a safe and happy trip Will.

Tomorrow I'll be driving up the the Derbyshire Dales, for one of my chill-out weeks. This is where I get right away from all things techy and just wander around the countryside, going in whichever direction my nose happens to point
As well as a good bit of exercise and really clean air, I get to 'reset' and connect with reality and what actually matters. I also get to meet up with a few folks who have become good friends over the years.

See you all week after next

Since many have given me suggestions on how to improve I will probably do one more.
They indicated that I have a lot to learn about EDM, especially when it comes to the low end.

Thanx Will.
Great response BTW 

Yes. Ticks all the boxes - not that I was ever in that position... Nooooo